Corrugated Roof Sheet Machine for YX17.5-75-825 profile

1.Main features of YX17.5-75-825 Corrugated Roof Sheet Machines

The advantages of YX17.5-75-825 Corrugated roof panel forming machine are as follows:

1.The produced panel is widely used in modern factory,such as workshop,4S auto shop,

is a new popular roof panel and wall decoration panel .

2.Easy operation, low maintenance cost

Machine Parts

1) YX17.5-75-825 Corrugated roof panel roll forming machine rollers

Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.

With Hard-Chrome Coating for long life.

With feeding material guide,Body framemade from 350# H type steel by welding

2) YX17.5-75-825 Corrugated Roof Sheet Machines pre-cutter

Avoid wasting material,easy to operate.The precutter is conneted with PLC control system,

PLC is calculating profile length within roll forming. Once material is required to change,

PLC is calculating the length for total and remind operator,production finishes

and able to manual shearing material before roll forming so as to change materialfor new production.

It is the advanced function and good for production to save material, no waste.

3) YX17.5-75-825 Corrugated Roof Sheet Machines post cutter

Cutter frame made from high quality 20mm steel plate by welding

Post cut, stop to cutting, use the same hydraulic motor drive

Hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa

Cutting tool material: mold steel Cr12(D3 steel), Heat treatment

4) YX17.5-75-825 Corrugated Roof Sheet Machines PLC control cabinet

5) YX17.5-75-825 Corrugated Roof Sheet Machines decoiler

Manual Decoiler: one set

Un-powered,manually control steel coil inner bore shrinkage and stop

Max. feeding width: 1000mm, coil ID range 470mm±30mm

Capacity: Max. 5Ton

With 6 tons hydraulic decoiler for option

5) YX17.5-75-825 Corrugated Roof Sheet Machines exit rack

Un-powered,one unit

Other detailes of YX17.5-75-825 Corrugated Roof Sheet Machines

Suitable for material with thickness 0.3-0.8mm

Shafts manufactured from 45#,Main shaft diameter=φ75mm,precision machined

Motor driving,Gear chain transmission, 19 rollers to form

Main motor=5.5KW , Frequency speed control. Forming speed approx.15-20m/min

PLC Control System

Combined with: PLC, Inverter, TouchScreen, Encoder, etc

Cut-to-length tolerance≤±2 mm

Control Voltage 24V