AUTO Double Layer Panel Roll Forming Machine

AUTO Double Layer Panel Roll Forming Machine
Down Profile
Effective Width Tolerance:±0.5mm
The Wave Spacing Tolerance:±0.5mm
The Wave Height Tolerance:±0.5mm
The Length Of Tolerance:±0.5(6m)

Material
Effective Width:760mm
Feeding Width:914mm
Material Thickness:0.3-0.8mm
Applicable Material:PPGI
With Yield Strength:235-550Mpa

Work Flow
5T Hydraulic Decoiler→Manual Pre-Cutter Device→Feeding Guide Device→Roll Forming System→Hydraulic Post Cutter Device→AUTO Exit Rack

Machine Components
1) 5T Hydraulic Decoiler:one set
Hydraulic Control Steel Coil Inner Bore Shrinkage And Stop
Auto Feeding Power And Self-Stop Device
Max Feeding Width:1220mm
Inside Coil ID Range:508mm±30mm,Outside Diameter:1600mm
motor:3KW,Oil pump motor:2.2KW
Capacity:Max.5 Ton,With Coil Car

2) Pre-Cutter Device
Shearing Cutter Material Use Cr12 Steel(=D2 Steel)
Our Pre-Cutter Can Easy Shear 0.8mm Thickness Material

3) Main Machine
With Feeding Material Guide Device
Body Frame Made From H450 type Steel
Side Wall Thickness:Q235 t20mm
Rollers Manufactured From 45# Steel,Hard Chrome Coated
Shafts Diameter=ф80/95mm,High Frequency Processing
Gear/Sprocket Driving,Up 18-step & Down 18-step To Form
Servo Motor=11KW,Frequency Speed Control
Roll forming Speed:18-25m/min
Equipped With A Safety Shield To Protect The Operator From Injury

4) Post Hydraulic Cutting Device
Post To Cut,Stop To Cutting,Two Pieces Type Of Cutting Blade Design
Hydraulic Motor:5.5KW;Cutting Pressure:0-16Mpa
Cutting Tool Material:Cr12MoV(= SKD11 Steel),Heat treatment to HRC58-62
With At Least One Million Times Of Cutting Life
The Cutting Power Is Provided By The Main Engine Hydraulic Station

5) PLC Control System
Control The Quantity And Cutting Length Automatically.
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen.
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc.