No products in the cart.
Roll Forming Machines
Double Layer Roll Forming Machine for Corrugated Panel and Roof Panel
Double Layer Roll Forming Machine can roll form two different roofing profiles without changing anything because it has two layers. Upper and lower can rollform different profiles. Besides,the sea freight for import is saved by 50%.It is popular choice of both new entrepreneurs and established metal building manufacturers.
The advantages of Quick Change type Purlin Roll Forming Machine when comparing with Traditional Channel Machines are as follows:
1.Produce different roof panel size in one machine
2.Save space
3.Easy operation, low maintenance cost
- item no.:YX51–699 &YX35-187
- lead time:about 45
- form speed:18-20m/min
- weight:14T
Details of Double Layer Roof Panel Machine
Material Thickness(&):0.3-0.8mm
Applicable material:Applicable material:Painting Steel,
Galvanized Steel,Tension Grade: 245Mpa or 550Mpa,
Machine Components
1)Manual Decoiler: one set
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton
2) Cold Rolling Mills:
With feeding material guide, body frame made from 350# H type steel by welding
Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust);Shafts manufactured from 45#,Main shaft Diameter=φ85mm,precision machined
Motor Driving,Gear chain transmission, 18/18 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)
Main Motor=7.5KW , Frequency speed control
Forming speed approx.12-18m/min
3)Hydraulic Cutting device
Cutter frame made from high quality 25mm steel plate by welding hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa
Cutting tool material: Cr12Mov, Heat treatment
4)PLC Control System
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack
Un-powered, two units
There are no reviews yet.