Stud and Track Roll Forming Machine for UC50-150 profile(SAMCO studmaker style)

Stud and Track CU Purlin Roll Forming Machine

1.Main features of Stud and Track Roll Forming Machine for CU50-150 profile

The advantages of CU purlin machine AUTOMATIC size-change type are as follows:

1.Produce different purlin size without changing rollers or spacers.

2.No need changing cutter for different size.

3.Easy operation, low maintenance cost

4.Infinite sizing(any size within machine range),help to save material

5.Optional Punch hole at any position of purlin web side and flange side

Machine Parts

1) CU stud and track machine punching system

2) CU stud and track machine rollers

Rollers manufactured from high quality bearing steel GCr15, CNC lathes, Heat Treatment.

with black treatment or Hard-Chrome Coating for options.

With feeding material guide, body framemade from 400# H type steel by welding

3) CU stud and track machine post cutter

No need to change cutter for different size,

made by high quality mold steel Cr12 with heat treatment

Cutter frame made from high quality 30mm steel plate by welding

Pre-punching & Pre-cutting, stop to punch, stop to cut

hydraulic motor:7.5KW, Hydraulic pressure range: 0-16Mpa

4) CU stud and track machine product show

5) CU stud and track machine decoiler

ManualDecoiler: one set

Un-powered,manually control steel coil inner bore shrinkage and stop

Max.feeding width: 500mm, coil ID range 470mm±30mm

Capacity: Max. 3Ton

With 3 tons hydraulic decoiler for option

6) CU stud and track machine exit rack

Un-powered,one unit

Other detailes of CU stud and track roll forming machine

Suitable for material with thickness 1.5-3.0mm

Shafts manufactured from 45#,Main shaft diameter=φ90mm,precision machined

Motor driving,Gear chain transmission, 20 rollers to form.

Main motor=18.5KW , Frequency speed control. Forming speed approx.18m/min

PLC Control System

Just adjust required WEB,HEIGHT and LIP by hand wheel with the help of

position clock(with digit display for easy operation) on it,

and then input the required production data on the touch screen.

It takes only 5-10 minutes to finish all. No need to change rollers or spacers or cutters

like traditional old style machine (which takes over 45 minutes for each production size changing).

Combined with: PLC, Inverter, TouchScreen, Encoder, etc

Cut-to-lengthtolerance≤±2 mm

Control Voltage 24V