Top Beam Roll Forming Machine For Container Room YX106-185

 

Material Detail 

Applicable Material: Galvanized Sheet      Meterial Thickness: 2.5-3.0mm

Inspection Thickness: 3.0mm                    Material Strength:sgh340

The Length of Tolerance: ±1mm (12M)

The Material of Machine Testing: BMS Group will provide the feed size to demander for purching in two weeks before machine testing.

Work Flow 

Hydraulic Uncoiler (Self-Provided ) → Feeding Guide Device →Lubricant Device  → Leveling Device  → Roll Forming（Cold Water Device）→ Hydraulic Post Punching Device 

→ Hydraulic Post Cutting Device → Exit Rack*2

Machine Components 

1、Feeding Guide Device

2、Leveling Device 

The Method of Feeding Adjustment: Manual

The Thickness Of Wallboard: Q235 t25mm

The Structure Of Wallboard: Integral Wall Panel

Guide Roller: 45# Steel Material, Shaft Diameter φ118

Leveling Roller: 40 Cr Steel, Shaft Diameter φ95

3、Roll Forming Mile 

Body frame made from H450 type steel by welding 

Side wall thickness: Q235 t25mm; 

Shafts manufactured from 45# steel, Shaft Diameter: φ 80/95

Spacer made from 20# Seamless Pipe, Plating Treatment

Rollers manufactured from Bearing steel Gcr15, heat treatment HRC58-62 Degree 

Every Machine with Cold Water Device. Gear & Chain drive about 26-step to form. 

Forming Speed: 15m/ min; Produced Speed: 10m/ min (Including punching and cutting time)

Main Motor: Double Servo Motors (22KW+22KW); Brand: Huichuan

Speed Reduce Motor: K Series

Chain: Polaroid

All the screw bolts with grade 8.8 (Cheap factories use low grade 4.8) to ensure fix the 

machine structure tightly and long life during the machine long time running.