Twin Batten Purlin Roll Forming Machine
Material
Feeding Width:235/395mm
Material Thickness:0.7-1.2mm
Applicable Material:GI
With Yield Strength:390Mpa
Work Flow
3T Manual Uncoiler→Feeding Guide Device→Hydraulic Pre-Punching Device→Roll Forming System→Hydraulic Post Cutting Device→Exit Rack
Machine Components
1) 3T Manual Uncoiler:one set
Manual Control Steel Coil Inner Bore Shrinkage And Stop
Auto Feeding Power And Self-Stop Device
Max Feeding Width:300mm
Inside Coil ID Range:508mm±30mm,Outside Diameter:1600mm
Capacity:Max.5 Ton.With Two Coil
2) Hydraulic Pre-Punching Device
Punching Material Use Cr12MoV Steel(=SKD11 Steel)
3) Main Machine
With Feeding Material Guide Device
Body Frame Made From H450 type Steel
Side Wall Thickness:Q235 t18mm
Rollers Manufactured From 45# Steel,Hard Chrome Coated
Shafts Diameter=ф75mm,High Frequency Processing
Gear/Sprocket Driving,Right 16-step & Left 11-step To Form
Main Motor=11KW,Frequency Speed Control
Roll forming Speed:20-25m/min
4) Post Hydraulic Cutting Device
Post To Cut,Stop To Cutting,Two Pieces Type Of Cutting Blade Design
Hydraulic Motor:4KW;Cutting Pressure:0-16Mpa
Cutting Tool Material:Cr12MoV(= SKD11 Steel),Heat treatment to HRC58-62
With At Least One Million Times Of Cutting Life
The Cutting Power Is Provided By The Main Engine Hydraulic Station
5) PLC Control System
Control The Quantity And Cutting Length Automatically.
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen.
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc.
6) Exit Rack:Two Units
There are no reviews yet.